Introduction; Make And Model Compatibility; Section Spacing - Raven Hawkeye 2 Installation Manual

CHAPTER
2

MAKE AND MODEL COMPATIBILITY

Hawkeye® 2 is a pressure-based product control system which allows for precise sprayer application over a range
of conditions and reduced spray drift. Each nozzle is controlled by an individual pulsing valve giving you a
consistent spray pattern as speed and conditions change.
Hawkeye® 2 is built on the ISOBUS communication platform which allows the system to work with most ISO
Universal Terminals (UTs) and task controllers, including the Viper® 4.
This manual is intended to provide installation instructions on the following equipment:
Compatible Equipment Information
TABLE 1.
Make and Model
AGCO Fendt RoGator 900 Series

SECTION SPACING

The information in the tables below are references for the machine configuration process on the Universal
Terminal. This information will be setup by default but should be confirmed during the initial configuration
process. Refer to the Hawkeye® 2 Calibration and Operation Manual for machine assistance with system setup or
operation.
Introduction: Make and Model Compatibility
I NTRODUCTION
C H A P T E R 2
Nozzle Body Nozzle
Type Spacing
Hypro
High Flow
Boom
Width
132' 117-2005-270
120' 117-2005-267
20"
100' 117-2005-264
90' 117-2005-261
132' 117-2005-269
19" 120' 117-2005-266
100' 117-2005-263
132' 117-2005-268
120' 117-2005-265
15"
100' 117-2005-262
90' 117-2005-260
120' 117-2005-271
15"
100' 117-2005-272
Kit Number
5