Raven Hawkeye 2 Installation Manual page 41

Hide thumbs Also See for Hawkeye 2:

Table of Contents

7. If not already applied, apply a single, short burst of corrosion inhibitor such as CorrosionX HD (P/N 222-0000-

020) to the NCV2 connection. Be sure the corrosion inhibitor has coated the NCV2 contacts and recessed

portions of the connector.

NOTE:

To determine whether corrosion inhibitor has been applied, inspect for a thick liquid in the bottom of

the connector as shown in the image below.

CorrosionX may also be purchased from the manufacturer website:

FIGURE 4. Applying Corrosion Inhibitor

Corrosion Inhibitor

Applied

: Hawkeye® 2 Boom Harness Connector Maintenance

https://www.corrosionx.com/products/corrosionx-heavy-duty.

NCV2

Connector

Table of Contents