Introduction; Preparing For Installation - Raven SmartTrax Installation Manual

For rbr vector 300 ls; rbr venturi ls

Table of Contents

I ntroduction

CHAPTER

C h a p t e r 2

Congratulations on your purchase of the SmarTrax system! This system is designed to provide cutting-edge,

hands-free steering of the machine via Global Positioning System (GPS) coordinates.

This manual applies to the following machines:

MAKE: RBR

MODEL: Vector 300 LS/Venturi LS

YEAR: 2013

RBR Vector 300 LS

FIGURE 1.

Before installing the SmarTrax system, park the machine where the ground is level, clean, and dry. Turn off the

machine and leave it turned off for the duration of the installation process. Bleed pressure from the hydraulic

system by loosening the hydraulic fittings slowly, where applicable.

Manual No. 016-5030-010 Rev. A

Table of Contents