Connections; Analog Connections - Panasonic SL-PR300 Operating Instructions Manual

SL-PR300EB.fm Page 6 Thursday, September 20, 2001 3:42 PM

Connections

Before making connections, be sure that the power of this unit and all other system components is first
turned off.

Analog Connections

Use the stereo phono cables to connect this unit's LINE terminals with those for the TAPE/CD/VCR on the receiver, etc.
Recording signals
(line input)
Accessory pin cables
Playback signals
LINE
( )
REC IN ( ) PLAY OUT
Only for Asian countries
Before connecting the AC mains plug to the household
mains socket, check that the voltage selector's setting cor-
responds with your AC mains voltage. If different, reset the
voltage selector to prevent risk of fire or electric shock and
damage of this unit.
If the power supply in your area is 115 V or 120 V, set the
voltage selector as follows:
For 115 V: set to 110 V
For 120 V: set to 127 V
Notes
• Misconnections can be avoided by using the white plugs of the
stereo phono cables for the LEFT channel and the red plugs for
the RIGHT channel.
• Insert the plugs all the way in. Incomplete connections may
cause noise.
RQT6091
TAPE
/CDR
Amplifier, receiver etc.
OUT IN
(REC)
(PLAY)
AC
VOLTAGE SELECTOR
mains
lead
DIGITAL IN
COAXIAL OPTICAL
Only for United Kingdom
READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 3 BEFORE CON-
NECTION.
This Unit
to household mains socket
DIGITAL OUT
COAXIAL OPTICAL