Web Filtering Configuration Commands; Display Firewall Http Activex-Blocking - H3C SecPath Series Command Reference Manual

Web filtering configuration commands

NOTE:
The file name conventions in this document are as follows:
Full file name: File path plus file name, a case-insensitive string of 1 to 135 characters excluding the end
•
character.
• File name: File name without file path, a case-insensitive string of 1 to 91 characters excluding the end
character.

display firewall http activex-blocking

Syntax
display firewall http activex-blocking [ all | item keywords | verbose ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all active blocking suffix keywords.
item keywords: Specifies a blocking suffix keyword. It is a string of 1 to 9 characters. It must start with a
dot "." and consist of characters 0 to 9, a to z, and A to Z.
verbose: Specifies detailed information.
Description
Use the display firewall http activex-blocking command to display information about ActiveX blocking.
If no parameters are specified, the command displays brief information about ActiveX blocking.
Examples
# Display brief information about ActiveX blocking.
<Sysname> display firewall http activex-blocking
ActiveX blocking is enabled.
# Display ActiveX blocking information about a specified suffix keyword.
<Sysname> display firewall http activex-blocking item .ocx
The HTTP request packet including ".ocx" had been matched for 5 times.
# Display ActiveX blocking information about all suffix keywords.
<Sysname> display firewall http activex-blocking all
SN Match-Times
----------------------------------------------
1 5
Keywords
.OCX
3