Multi - None - None - Multi - Yamaha SIGMA-G5SII Service Information

3.1.4.6. Multi - None - None - Multi

The nozzle stocker for multi-functional is added to the nozzle stocker unit for multi-
functional nozzle.
Note:
(1) Connect the nozzle stocker as shown in the following figure.
Set the Up-Status Detection Sensor for the Nozzle Stocker Unit for Multi-Functional Nozzle to
" "
AND .
(2) Because the print mark for the connectors for the nozzle stocker addition valves is only
" " " "
mark 2 to 4 additionally to each connector using a magic pen, etc., as shown in the following
figure.
(3) For the shutter open/close for the added nozzle stocker for multi-functional nozzle, the
"
open/close #3 is applied. The shutter valve (for addition) for the high-speed nozzle is not used.
Service Information
Fig. C11
SI1705004E-00=SIGMA-G5SII Service Manual
90/273
For Service Engineer
" "
XUP ,
"
shutter