Touch Panel Attachment Procedure; Touch Panel Adjustment Procedure - Yamaha SIGMA-G5SII Service Information

(3) Remove the setscrews in the four locations in the touch panel support section and
remove the touch panel only.

6.3.2. Touch Panel Attachment Procedure

For the touch panel attachment procedure, use the reverse procedure for the removal.
(Refer to "6.3.1 Touch Panel Removel Procedue")

6.3.3. Touch Panel Adjustment Procedure

(1) Open the Debug Mode window.
Refer to "2.9 Change Procedure to Debug Mode" in Chapter 2, for Debug Mode
window display procedure.
(2) After displaying the Debug Mode window, touch the location around the center of
the lower section of the panel. (Refer to Fig. F5). After tap, three icons are displayed
on the left hand side. Select the Windows icon.
Fig.F4
Fig.F5
235/273
For Service Engineer
Service Information
Remove the screws in specified four locations.
2. Select the Windows icon.
1. Tap the specified section
SI1705004E-00=SIGMA-G5SII Service Manual