Yamaha SIGMA-G5SII Service Information page 265

(4) Management Data Communication
The management data is communicated.

Management Data Communication

Pattern Program Management Data Communication

Component Handling Error Rate Data Communication

Recall Data Communication
Management Data Window in the Machine
In Normal Condition: Totals 1 and 2
" "
(*The Total 3 can be checked only in the machine and it cannot be sent to NT-100
system.)
(5) Nozzle Related Data Communication
The nozzle related data is communicated.

Placement Nozzle Data Communication

Placement Nozzle Type Data Communication
(6) Machine System Data Communication
The machine system data is communicated.

Machine System Data transmission and receipt
(7) Back-up/Recovery Communication
The pattern program data, component library data and system data are received from
the machine to create backup data. Also, the backup data is recovered.

Backup (The No. of backup files should be 1 to 10, which can be saved).

Recovery
Service Information
In Debug Mode: Totals 1, 2 and 3
SI1705004E-00=SIGMA-G5SII Service Manual
265/273
For Service Engineer