Yamaha SIGMA-G5SII Service Information page 228

(3)-1 D-Drive Re-format confirmation Dialog.
When the D-Drive is to be used as it is, select [NO].
When the D-Drive is to be re-formatted and used, select [YES].
When re-formatting is performed, the data in the Drive D is totally deleted.
(3)-2 Re-Start Execution Warning Dialog (File Format Conversion)
When the file format in the Drive D is "FAT", this message is displayed.
When the [OK] button is selected, the machine is re-started and the file format
change processing is performed. After the re-start, the operation from Item (3)-2 is
executed.
(3)-3 End Dialog
When the initial setting operation is completed normally, the execution completion
confirmation dialog appears.
Select [OK] to delete the confirmation dialog. Then, select the [Close] button located
in the lower section of the monitor screen to end the initial setting application. Now,
the initial setting operation has been completed.
* Subsequently, the "Machine Software" installation is performed. Insert the
"Machine Software Installation CD-ROM" into the CD Drive and re-start the
CPU1 BOX-PC. Refer to Item 4 for the machine software installation application.
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
228/273
For Service Engineer