Cutter Unit Attachment/Removal Procedure; Cutter Unit Removal - Yamaha SIGMA-G5SII Service Information

4.14. Cutter Unit Attachment/Removal Procedure

4.14.1. Cutter Unit Removal

(1) Take out the feeder cart from the machine.
Lower the feeder base with the machine
stopped.
Disconnect the machine connecting
connectors and pull out the feeder cart.
(2) Remove the machine's area cover.
Undo the lock on the both sides and remove the cover.
(3) Loosen the two set bolts for the cutter unit to remove.
Undo the lock on the right and left sides (two locations).
Remove the bolts on the right and left sides (two locations).
Service Information
Fig.D92
Fig.D93
SI1705004E-00=SIGMA-G5SII Service Manual
172/273
For Service Engineer
Fig.D91