Gain Teaching; Axis Origin/Master Nozzle Level Offset Teaching - Yamaha SIGMA-G5SII Service Information

4.21.1.6. Gain Teaching

Perform the gain teaching, referring to the separate document material " 2.1 Side View
Camera Gain Teaching " .
4.21.1.7. NL-Axis Origin/Master Nozzle Level Offset Teaching
(1) Attach the master nozzle to any nozzle No. position on the head to be adjusted.
(2) Select " Ship Adj. " and " NL-Axis Org/Master Noz Lv " in this order.
(3) Select the head to be adjusted in " Select head " section and designate the nozzle No.
position where the master nozzle has been attached in " Noz " .
(4) Press " Teach Start " and press the [START] button to start the teaching.
(5) Press " Save " to save the teaching results.
Service Information
Fig.D131
SI1705004E-00=SIGMA-G5SII Service Manual
200/273
For Service Engineer