Yamaha SIGMA-G5SII Service Information page 70

(6) Remarks
When the conveyor function only is to be used due to a system trouble, etc., forcible
continuous PCB transfer operation for discharge is available.
[1] Click "Maint. ", "Unit Adj. " and "Cnvr" button in this order to select.
Select "Hi Speed" or "Low Speed" for the conveyor speed, and click "Pass Opn START".
Then, within 5 seconds, press the [START] button on the operation panel.
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
70/273
For Service Engineer