Multi - None - None - High - Yamaha SIGMA-G5SII Service Information

3.1.4.5. Multi - None - None - High

The nozzle stocker for high-speed nozzle (fourth line) is added to the nozzle stocker for
multi-functional nozzle.
Note:
(1) Connect the nozzle stocker as shown in the following figure.
Set the Up-Status Detection Sensor for the Nozzle Stocker Unit for Multi-Functional Nozzle to
" "
AND .
(2) Because the print mark for the connectors for the nozzle stocker addition valves is only
" " " "
mark 2 to 4 additionally to each connector using a magic pen, etc., as shown in the following
figure.
(3) The shutter valve (for addition) for the nozzle stocker for high-speed nozzle functions for the shutter
open/close operation for the high-speed nozzle stocker to be added.
Service Information
Fig.C10
SI1705004E-00=SIGMA-G5SII Service Manual
89/273
For Service Engineer
" "
XUP ,