Placing / Removing The Device On/From Support (Accessory); Attaching And Removing The Power Supply Unit (Accessory); Attaching And Removing The Power Supply Unit To The Support - Atmos C 051 Thorax Operating Instructions Manual

7.4

Placing / removing the device on/from support (accessory)

7.5

Attaching and removing the power supply unit (accessory)

1
2
7.5.1

Attaching and removing the power supply unit to the support

48
1. Place the device on the support.
 Make sure that the guides of the carrying handles or
the lateral strap holders are inserted into the guides
on the support.
2. Remove the device from the support by the carrying
handle or on the canister recess.
Assembly recesses
1
Recess for storage of the power supply unit and power
2
cable.
1. Place the support onto the power supply unit by
placing the thread at the bottom of the support over
the fixing screw of the power supply unit.
2. Tighten the support with the provided screws and the
recommended screwdriver (TORX - screwdriver - T10).
3. Remove the support by loosening the screws with the
screwdriver (TORX - screwdriver - T10).