4.4 Barrier Installation
4.4.1 Safety Barrier Screen (#CW40-ES)
1.
Locate the (2) slots located on each side of the fireplace metal
cabinet.
2.
Align the notched tabs located on the back of the safety screen
with the slots on the fireplace frame.
3.
Raise the safety screen front slightly into slots and allow the tabs
to lower into position.
•
To remove safety screen: lift the screen up and out of slots.
Figure 4.11, Safety Screen Installation
4.4.2 Optional Surrounds (CW40-RS,
CW40-RS4, CW40-GS, CW40-MS)
1.
Remove the safety barrier.
2.
Locate the (2) mounting nuts on each side of the fireplace metal
cabinet.
3.
Align the mounting holes on the surround to the corresponding
mounting nuts.
4.
Secure with (4) truss head screws (provided).
5.
Reinstall safety barrier.
#CLW-40 R.3 November 2021
Figure 4.12, Surround Installation
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
Mounting
nuts
FACING AND FINISHING 37
(2) Truss head
screws (left side)