Table of Contents
Advertisement
10.9.9 Top Accent Light Kit
The top light intensity can be adjusted through (6) levels.
1.
Press the mode key to index to the light icon.
2.
Press the up or down arrow keys to adjust the intensity level.
3.
A single 'beep' will confirm reception of the command.
10.9.9.1 Deactivate Light Kit Modulation
1.
Verify all (3) AAA batteries are installed in the remote control
battery bay.
2.
Remove (1) AAA battery.
3.
Press and hold the on/off key and the mode key at the same
time.
4.
Reinsert (1) AAA battery.
While still holding the on/off key, let go of ONLY the mode key.
5.
6.
Index over to the bulb graphic on the LCD screen to edit. Use the
up or down arrow key to choose 'SET' or 'CLR' .
10.9.10 Remote Control Low Battery Detection
Remote control battery lifespan depends on various factors including
battery quality, number of ignitions, changes to room thermostat set
point, etcetera.
•
When the remote control batteries are low, a battery icon will
appear on the LCD display before all battery power is lost.
•
When the batteries are replaced, this icon will disappear.
#CLW-40 R.3 November 2021
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
OPERATING INSTRUCTIONS 63
Advertisement
Table of Contents
