Table of Contents
Advertisement
9.3 #600-TLK Top Light Kit
CAUTION: Disconnect all electrical power from the fireplace before
performing this task.
NOTE: To avoid damage and prolong the life of the halogen bulbs,
never touch with bare hands. Always use a soft cloth when handling.
9.3.1 Install Light Kit
1.
Remove the safety screen, access cover, and glass frame
assembly (if installed).
2.
Remove the light kit cover and roped glass (4) screws. Save
screws.
3.
Install or replace (2) halogen bulbs (included with this kit) into
lamp bases.
4.
Reinstall light kit cover and roped glass with (4) screws
previously removed.
5.
Reinstall glass frame assembly, access panel, and safety screen.
Figure 9.3, Light Kit Wiring
#CLW-40 R.3 November 2021
YELLOW FEMALE
CONNECTORS
BLUE FEMALE
CONNECTORS
RED MALE
CONNECTORS
(from control module)
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
Figure 9.2, Light Kit Location
RED MALE
CONNECTORS
ELECTRICAL INFORMATION
55
Advertisement
Table of Contents
