Actual Load Calibration; Calibration Lock Release - Unipulse F156 Operation Manual

4.CALIBRATION

4-3. Actual Load Calibration

4-3-1. Calibration lock release

The F156 has a calibration inhibiting (Lock) function which prevents entered calibration data
from unintentional change. This Lock must be released calibrating.
Set 49 "Lock (Soft)" in the setting code to "0."
Lock switch OFF position on the front panel
When the calibration lock is ON, changing of initial setting items is also
disabled. For the setting items the changing of which is disabled, see the table
of set values.
38
CAUTION
LOCK