6-5. Motion Detection
Set the parameters for detecting stability.
When the condition of the weight value, varying under the preset range, continues for the preset
time or more, the weight value is regarded as stable, and the STAB status turns ON.
At each time of A/D conversion, D in the following figure and the range are compared, and if
the preset range is exceeded, the STAB status turns OFF.
* D is the difference between the present weight value and 100msec.-old weight value.
D
Weight
value
10ms
100ms
6.FUNCTIONS
Setting range
Period / 0.0 to 9.9
Initial value / 1.5
Range / 0 to 99
Initial value / 10
57