Interface; General Performance - Unipulse F156 Operation Manual

15-3. Interface

CC-Link interface
(Serial bus interface for connection with Mitsubishi PLC as the remote device stations
corresponding to CC-Link Ver.1.10.)
RS-232C interface
Weight data, various statuses, and various set values can be written and read by commands from
the host side.
(Exclusively used with setting remote console unit C110 or C120)
SI/F 2-wire serial interface
This is a simple output serial interface for connection of a UNIPULSE-manufactured printer,
external display, etc.

15-4. General performance

Power supply voltage
Power consumption
Dimensions
Operating conditions
Weight
Transmission medium: 3-wire type (shielded)
Transmission speed: Selectable from 156K/625K/2.5M/5M/10Mbps
Specifications:
Transmission method:
Transmission speed:
Format:
Transmission method:
Transmission speed:
Selectable from
85 – 110V/102 – 132V/170 – 220V/187 – 242V AC.
50/60Hz 13.0/12.5VA (when 100V is rated)
67W×185H×130D (mm)
(excluding projections)
Temperature:
Humidity:
Approximately 1.7kg
RS-232C-based
Full duplex/start-stop method
Selectable from
1200 / 2400 / 4800 / 9600 / 19200 / 38400 bps
Data length: 7/8 bit
Stop bit length: 1/2 bit
Parity bit: Odd / Even / None
Start-stop method
600 bps
Operating temperature range:-10 to +40 ℃
Storage temperature range: -20 to +80 ℃
85%RH or less (non-condensing)
15.SPECIFICATIONS
149