10．Rs-232C Interface; Communication Settings - Unipulse F156 Operation Manual

10. RS-232C INTERFACE

10-1. Communication Settings

Through the RS-232C interface, you can read indicated values and write set values.
Decide the communication mode with the rotary switch and DIP SW on the main body.
Rotary switch (mode and baud rate)
No.
0
1
2
3
4
5
6
7
8
9
DIP SW
No.
4
3
2
1
Switch No. 1 – 4 of DIP SW are settings for the RS-232C. These settings have meanings only
when the power is turned on. If you change any of the settings, turn the power off and on again.
The terminator is fixed at CR.
Mode and baud rate
Console mode (C110 or C120)
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
Setting disabled
Function
Parity bit
Parity bit
Stop bit
Data length
ON OFF
Odd Even
Available Unavailable
2bit 1bit
7bit 8bit
10.RS-232C INTERFACE
123