If Check Wiper Waste Inktank Warning Appears - MIMAKI UJF-3042 MkII Series Operation Manual

Chapter 4 Maintenance
If Check Wiper Waste Inktank Warning
Appears(UJF-3042MkII/6042MkII only)
Ink sucked up by wiping during head cleaning and other
processes is collected in the wiper waste ink tank at the
rear right of the machine.
This machine keeps track of total waste ink levels from
suction wiping and displays a warning prompting the user
to check once waste ink levels reach a preset level.
This should be used as a guide for replacing the waste ink
tank.
• A message is displayed when levels reach 60%
(0.06 L) of the 0.1 L wiper waste ink tank.
Confirmation Message in LOCAL
mode
The warning message "Check wiper waste
1
inktank" is displayed.
Press the
2
Empty the wiper waste ink tank in
3
accordance with "Discard wiper waste ink"
( P.4-24).
• If you continue to use this machine without
discarding waste ink, waste ink may overflow from
the waste ink tank.
• Continuing to use the machine without disposing
of the wiper waste ink may damage the suction
wiper pump.
4-24
key.
Discard wiper waste ink.
If the "Check wiper waste inktank" warning appears on the
local display, discard the waste ink as follows:
Press (MENU) in the local mode
1
Press to select "Maintenance",
2
then press the
• Maintenance menu is displayed.
Press the
3
• "STATION" will be selected.
Press
4
WIPER WASTETANK" , then press the
key.
• "REPLACE WIPER WASTETANK " will be
selected.
Remove the wiper waste ink tank.
5
(1) Open the door of the wiper waste ink tank
box.
Wiper waste ink tank box
(2) Hold the waste ink tank and slowly rotate
clockwise to remove the bottle. Be careful to
avoid spilling the ink.
Empty the wiper waste ink tank.
6
• Please dispose of waste ink in a separate vessel.
• Assign waste ink disposal to an industrial waste
disposal contractor.
key
key.
to select "REPLACE