About Table; About Tap Position - MIMAKI UJF-3042 MkII Series Operation Manual

About table

It is necessary to adjust the table height depending on the media thickness because various media can be set for printing.
The specification of each table is as less:
UJF-3042MkII/UJF-3042MkII e
Acceptable media
*1
weight
Vacuum function
Table movable area
Media thickness
*1. If you place a heavier object than specified, the table will deform and the image quality will deteriorate.

About tap position

The table and the vacuum table on which the media set have the M4 tap (UJF-3042MkII/UJF-3042MkII EX: for 14
positions, UJF-6042/: for 18 positions) of the size below respectively.
• UJF-3042MkII/UJF-3042MkII e
Table
UJF-3042MkII EX/UJF-3042MkII EX e
5kg and less
No(Option)
(1) Movable area 53mm + (2) 50mm spacers x 2 levels = 100 mm
Table
UJF-6042MkII/UJF-6042MkII e
5kg and less
Yes
0 to 53mm
0 to 153mm (6inch)
• UJF-3042MkII EX/UJF-3042MkII EX e
Vacuum Table
Chapter 1 Before Use
8kg and less
Yes
1-9
1
2
2
2
2