Printing Check Flow; Printing Operations At "Nozzle Missing" Judgment And Error Occurrence; Printing Operations At "Nozzle Missing" Judg- Ment And Error Occurrence - MIMAKI UJF-3042 MkII Series Operation Manual

Printing Check Flow

Nozzle check is conducted according to the following flow at the start of printing.
• Turn the "Printing Check" setting ON to be enabled.
• Only perform RETRY COUNT and Printing Check settings when the settings are enabled.
1
nozzle check  Judgment
2
Recovery operation 
nozzle check  Judgment
3
Retry  Judgment
4
Printing Check  Judgment
5
Nozzle Missing judgment

Printing Operations at "Nozzle Missing" Judgment and Error Occurrence

 When judged to be "Nozzle Missing"
 When error occurs during nozzle check
Detects missing nozzles.
If more missing
Condition " are detected after the nozzle check,
cleaning is performed and nozzle check is
conducted again.
If more missing
Condition " are detected after the recovery
operation, the recovery operation is conducted
again.
Nozzle recovery is automatically conducted
following nozzle check and recovery operation.
• Turn the "Printing Check" setting ON to be enabled.
If more missing nozzles than A are eventually
detected, continued printing will be deemed
impossible and printing will stop.
 Printing is stopped.
 Printing is stopped and "Printing Check" is automatically turned
OFF. After recovering from the error, set "Printing Check" once
again.
Chapter 3 Setup
nozzles than "Judgement
nozzles than "Judgement
3
2
2
2
3-27