Table of Contents
Advertisement
4.4
Assembling the handwheel
The handwheel and all parts for installation are included in the carton with the accessories.
The handwheel can be dismounted f o r transporting (e.g. narrow doors).
1
To install the handwheel, follow these steps:
• Insert the pin (1) of the handwheel shaft into the hole (2) of the handwheel.
• Attach the spring washer (3) to the screw (4) as shown in Fig. 10.
• Tighten the screw (4) using an Allen key (6 mm).
• Attach the cover disk (self-adhesive - not pictured).
To dismount, proceed in reverse order.
Rotate the handwheel only if the refrigeration system is on and the cryochamber is cold.
Leica CM1520 – Cryostat
2
3
4.
Setting up the Instrument
4
4
Fig. 10
21
Advertisement
Table of Contents
