Table of Contents
Advertisement
4.2
Unpacking instructions for the CM1520 cryostat
Fig. 4
Caution when
removing the
m e t a l s t r i p s !
There is a risk
of injury when
opening them
(the strip has
s h a r p e d g e s
a n d i s u n d e r
tension)!
3
4
Leica CM1520 – Cryostat
When the instrument is delivered, check the tilt indicators on the
packaging.
If the arrowhead is blue, the shipment was transported laying flat,
was tilted at too great an angle or fell over during transport.
Note this on the shipping documents and check the shipment for pos-
sible damage.
2
Fig. 5
• Lift the outer carton ring (2) upwards and out.
3
• Remove the foam transport anchors (3), and then pull the dust
cover from the instrument.
• Remove the accessory crate (4).
Fig. 6
5
4.
To remove the metal strips (1), you
need metal shears and suitable
gloves. Stand next to the crate and
cut the strips at the location shown
(see Fig. 5 "").
1
Setting up the Instrument
17
Advertisement
Table of Contents
