Table of Contents
Advertisement
6.
Unpacking and installation
Fig. 12.1
Fig. 12.2
12
1
2
3
4
1
6.3
Assembly of the handwheel
The handwheel including the fixing compo-
nents are packed in the cardboard box for the
accessories.
• Insert the pin (1) of the handwheel shaft in to the
hole (2) of the handwheel.
• Mount the spring washer (3) on the screw (4) as
shown in Fig. 12.1.
• Tighten the screw (4) with an Allen key (5 mm).
To disassemble, proceed in reverse order.
Remove the protective foam parts for the mi-
crotome and for the evaporator (1) prior to op-
erating the instrument (see Fig 12.2)!
Instruction Manual V2.1 – 12/2001
Advertisement
Table of Contents
