4.
Startup
4.4 Assembling the handwheel
The handwheel has to be assembled before attempting
to use the instrument.
The necessary parts and tools can be found in the tool-
kit supplied in the delivery.
Fig. 9
18
The feather key (4) is loosely
placed in the handwheel shaft (1)
and fixed in place with a tie-rap
during transport.
• Remove the cable tie (3).
4
Caution!
3
Make sure not to lose the
feather key!
• Place the handwheel (2) on the
1
handwheel shaft (1) as shown.
• Tighten the screw (2a) located
in the center hole of the hand-
wheel with an Allen key size 4
2
(5).
• Remove the cover foil from the
self-adhesive cover disk and
2a
fix the cover disk on the hand-
wheel.
5
Instruction manual V 1.4 – 02/2010