Assembling The Handwheel - Leica RM2235 Instructions For Use Manual

4. Instrument Setup
4.4

Assembling the handwheel

The handwheel has to be assembled before attempting
to use the instrument.
The necessary parts and tools can be found in the toolkit
supplied in the delivery.
Fig. 9
16
The feather key (4) is loosely
placed in the handwheel shaft (1)
and fixed in place with a cable tie
during transport.
• Remove the cable tie (3).
4
Caution!
3
Make sure not to lose the
feather key!
• Place the handwheel (2) on the
1
handwheel shaft (1) as shown.
• Tighten the screw (2a) located
in the center hole of the hand-
wheel with a Allen key No. 4 (5).
2
• Remove the cover foil from the
self-adhesive cover disk and
fix the cover disk on the hand-
wheel.
2a
5
Instructions for Use V 2.3 RevH – 05/2018