Advertisement
PARTS REQUIRED:
x1
BEGIN
1
Place spring bolt on OO in the open position with bolt end 3/8" down from frame.
Bolt is open when loop is contacting base (Fig A).
Mark and pre-drill holes for screws.
2
Install bolt with screws supplied and drill 5/16" hole for bolt to extend into.
LEFT
DOOR
DOOR HARDWARE
LOCATE AND PRE-DRILL HOLES TO AVOID SPLITTING WOOD
OVER DOOR FRAME
1-1/4 x 2-1/2 x 69"
OPEN POSITION,
Spring is loose.
53
5/16" (8 mm) Drill Bit
Fig. A
OO
x4
x4
1" (2,5 cm)
5/16" drill for bolt:
1" deep.
3/8" with bolt in open
position.
PRE-DRILL
(4) HOLES
Loop contacts
base.
Advertisement
