Advertisement
3-TAB SHINGLES (Bundles)..................... 7
PAINT FOR SIDING (Gallons)................... 3
Use 100% acrylic latex exterior paint.
(2) coats recommended.
1" GALVANIZED ROOFING NAILS(lbs)... 4
For shingles.
DRIP EDGE (Feet)....................................... 60
#15 ROOFING FELT (Sq ft. to cover)........ 198
1" GALVANIZED ROOFING NAILS (lbs).... ½
For roofing felt.
REFER TO THE BACK OF THIS MANUAL AND THE MANUFACTURER'S INSTRUCTIONS
FOR INSTALLATION OF SHINGLES, DRIP EDGE AND FELT.
You will need floor panels and nails to complete your floor.
NOTE: Use a minimum of 5/8" (1,6 cm) Oriented Strand Board (OSB)
5/8" x 48" x96"
x5
(1,6 x 121,9 x 243,8 cm)
x1
2" (5,1 cm)
x5
BOXES
x6
BOXES
ADDITIONAL MATERIALS
COMPLETING YOUR SHED
You will need these additional materials:
OPTIONAL MATERIALS
FLOOR PANELS (Not Included)
Floor panel sizes and quantities are shown below.
1 lb. of 2" (5,1 cm) Hot Dipped Galvanized Box-Type Nails.
NAIL BOXES (Shown Actual Size)
PAINT FOR TRIM ......................1 Quart
Use 100% acrylic latex exterior paint.
CAULK ...................................... 4 Tubes
Use acrylic latex exterior caulk that is paintable.
3" (7,6 cm)
2" (5,1 cm)
4
Advertisement
