Advertisement
PARTS REQUIRED:
x27
2" (5,1 cm)
x13
1-1/2" (3,8 cm)
BEGIN
1
Center 2nd gable wall on the fl oor.
Ensure 1-1/2" measurement is at the top.
Secure back wall with (1) 2" screw into
side wall bottom plate (Fig. A) and top plate
(Fig. B).
Secure wall to bottom plate fi rst.
ENSURE PANEL CORNERS ARE FLUSH.
2
Nail lower edge of side wall panels to fl oor
with 2" nails spaced 6" apart.
Angle nails into the fl oor frame (Fig. C).
Secure wall bottom plates to fl oor with 3" nails
(Fig. C).
Nail back wall panel to side wall stud with 1-1/2" nails
spaced 6" apart.
3
Secure wall top plate with (1) 3" screw at
the corner at an angle, as shown (Fig. D).
Fig. D
3" (7,6 cm)
Nails
Nail 2" nails fi rst.
2" (5,1 cm)
Nails
Fig. C
FINISH
Your 2nd gable wall is now installed.
GABLE WALL INSTALLATION
x2
2" (5,1 cm)
x1
2" (5,1 cm)
Screw
3" (7,6 cm)
Screw
1-1/2" (3,8 cm)
Nails
6" (15,2 cm)
x12
3" (7,6 cm)
Fig. B
Flush
3" (7,6 cm)
Nails
26
3" (7,6 cm)
1-1/2"
(3,8 cm)
2" (5,1 cm)
Screw
Fig. A
6"
(15,2 cm)
Do not nail
in groove.
Advertisement
