Advertisement
Assemble this door header before building any walls!
PARTS REQUIRED:
x2
AM
2 x 4 x 67" (5,1 x 10,2 x 170,2 cm)
x1
7/16 x 3-1/4 x 66-3/4" (1,1 x 8,3 x 170,2 cm)
BEGIN
1
Place (1) AM and OSB end-to-end on fl at surface, fl ush in middle.
Center OSB on top of AM.
Fasten together with 3" nails in the pattern shown.
2
Flip header assembly over and nail as shown on the other side.
Flush
FINISH
Your door header is now assembled.
DOOR HEADER
Any wall with a door will require this assembly.
OSB
AM
x18
AM
OSB
15
3" (7,6 cm)
ASSEMBLED
END VIEW
Flush
Advertisement
