Advertisement
PARTS REQUIRED:
x12
6 x 24" (15,2 x 60,9 cm)
ADA
x14
2 x 4 x 77-15/16" (5,1 x 10,2 x 198 cm)
x1
OO
Temporary Support
69" (175,3 cm) Door Stiffener
BEGIN
Place two rafter-halves AD in the corner of back and side walls, fl ush to panels and studs.
1
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
Flush
1/4"
1/4"
(1,9 cm)
(1,9 cm)
Fig. A
HINT:
Use fl oor and walls to help
assemble rafters!
SET ASIDE THESE TWO RAFTER ASSEMBLIES.
2
Place two rafter-halves AD in the corner of back and side walls, fl ush to panels and studs (STEP - 1).
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
3
Flip over rafter assembly and fasten second gusset to other side with 2" nails (FIg. C).
Fig. B -
Build 2
(304,8 cm)
(243,8 cm)
FINISH
Your rafters are now assembled.
Build (2) rafter assemblies with (1) gusset (Fig. B).
Temporary support (OO)
Build 5 rafter assemblies with (2) gussets (Fig. C).
120"
96"
RAFTERS
120"
(304,8 cm)
Fit base of rafters in corners
of back wall.
Fig. C -
29
x144
2" (5,1 cm)
Flush at peak
Build 5
120"
96"
(243,8 cm)
(304,8 cm)
Advertisement
