Advertisement
If you choose to install your kit on a concrete slab refer to the diagram below.
Attach the sill plates on the foundaton as shown, and continue on to page 9.
C
Building Size
12' x 12' (365,8 x 365,8 cm)
12' x 11'-8-5/8" (365,8 x 357,2 cm)
12' x 12' Building Requires:
x4
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm)
x1
Caulk
Allow new concrete slabs to cure for at least seven (7) days.
• A treated 2 x 4 (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Purchase full length treated lumber, or butt shorter pieces end-to-end and seal seams with caulk.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4 (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
CONCRETE FOUNDATION
B
4"
(10,2 cm)
Actual Floor Size
D
D
3-1/2"
(8,9 cm)
B
A
144" (365,8 cm)
137" (348 cm)
NOTES
9
Treated Sill Plate
Caulk between
sill plate and
concrete.
A
Sill plates MUST be treated lumber.
C
144" (365,8 cm)
203-5/8" (517,2 cm)
D
Advertisement
