Advertisement
PARTS REQUIRED:
3/4" GAUGE
BLOCK
Roof panels may cause serious injury until securely fastened.
Install all roof panels with the rough side facing up (painted grid lines side).
BEGIN
1
Install the 48 x 96" panel first.
Use the gauge block to ensure the
3/4" measurement on the rafter
(Fig A), and that the panel is flush at
the peak (Fig. B).
Secure the panel with (2) 2" nails in
the corners.
2
Move to the opposite end.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top
corner is flush at the peak
(Fig. B),
Adjust the back gable panel for the 1/2"
measurement (Fig. C).
Secure panel with (2) 2" nails in the corners.
ROOF PANELS
x1
Roof Panel
Rafter
Gable Panel
Fig. C
1/2"
(1,3 cm)
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
2 Nails
33
x4
2 Nails
Gauge
Block
Fig. A
3/4"
(1,9 cm)
2" (5,1 cm)
Flush
at peak
Fig. B
Flush
at peak
Fig. B
Advertisement
