Table of Contents
Advertisement
2.
INSTALLATION
All 7814UDX-4K series modules come with a companion rear plate and occupy two slots in the 7800FR
frame or three slots in the 7700FR-C. If a 7814UDX-4K series module is installed in a 7700FR-C without
the "slot blocker" installed, the card will not power-up and will show RED on its main status LED. For
information on mounting the rear plate and inserting the module into the frame see section 3 of the
7700FR manual. Refer to section 6.2 of this manual for more information on the 7814UDX-4K series slot
blocker. Refer to Figure 2-1 for 7814UDX-4K series rear plate layouts.
NOTE: For proper operation in the 7700FR-C, the on-board "slot blocker" must be installed in
order for the card to power-up.
Figure 2-1 : 7814UDX-AES8-4K and 7814UDX-AES8-4K-12G Rear Plates
HD/3G/UHD Up/Down/Cross Converters
Revision 1.2
7814UDX-4K Series
Page - 5
Advertisement
Table of Contents
