Input/Output Connections - evertz 7814UDX-4K Series User Manual

Table of Contents

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

2.1.

INPUT/OUTPUT CONNECTIONS

PGM IN A/B/C/D:

PGM OUTPUT A1/A2/B1/B2/C1/C2/D1/D2:

These DIN connectors are used to output video as serial component video. All outputs are compatible with

SMPTE 292M, SMPTE 259M or SMPTE 372M standard.

REF IN:

This DIN is for connecting a bi-level or tri-level reference. The Reference format is auto-

detected by the module. Output video can be timed with respect to the supplied

reference using the H Phase Offset and V Phase Offset module controls. When no

reference is provided, the output video is timed with respect to the input video.

Reference may also be supplied via the 7700FR-QT, 7801FR and 7800FR FRAME

REFERENCE inputs. User Control is used to select either the card's external reference

or the FRAME REFERENCE inputs.

The 7814UDX-4K series conversion modules accept standard reference signals including bi-phase (525i59

or 625i50) and tri-level sync signals (1080i59 or 1080i50).

Page - 6

Accepts a 10-bit serial digital video signal. All inputs are compatible with SMPTE

292M, SMPTE 372M and SMPTE 425M standards. The module can be set to

receive a specific video standard or set to automatically detect the supplied input

video standard.

Note: Non-4K inputs must be plugged in to PGM IN A.

Revision 1.2

Table of Contents