evertz 7814UDX-4K Series User Manual page 26

7814UDX-4K Series
HD/3G/UHD Up/Down/Cross Converters
MODULE
STATUS:
LOCAL FAULT:
PGM IN A
PRESENT:
PGM IN B
PRESENT:
PGM IN C
PRESENT:
PGM IN D
PRESENT:
PATH1 AUDIO
PRESENT:
REF PRESENT:
FAN FAULT:
Page - 16
This Green LED will be On when the module is operating properly.
This Red LED will be On when an essential module input is missing or the module
has another fault.
The PGM IN A PRESENT LED will be green when a valid input signal is present on
the PGM IN A. It will be off when missing an input signal.
The PGM IN B PRESENT LED will be green when a valid input signal is present on
the PGM IN B. It will be off when missing an input signal.
The PGM IN C PRESENT LED will be green when a valid input signal is present on
the PGM IN C. It will be off when missing an input signal.
The PGM IN D PRESENT LED will be green when a valid input signal is present on
the PGM IN D. It will be off when missing an input signal.
The PATH1 AUDIO PRESENT LED will be green when a valid audio signal is
detected in embedded Audio group 1 on the first processing path of the module. It
will be off if no audio is detected in Audio group one.
The REF PRESENT LED will be green when a valid reference signal is present on
the REF IN DIN. It will be off when missing a reference signal.
This LED will be green when both on-board fans are operational. If one or both on-
board fans fail this LED will be off.
Revision 1.2