Table of Contents
Advertisement
7814UDX-4K Series
HD/3G/UHD Up/Down/Cross Converters
When the input standard is set to Auto, the module will auto detect the video standard.
Output Video Standard: The Output Video Standard control selects the output standard desired. Note
that only conversions within the same frame rate family are supported. The module is not capable of
converting between 59.94/60 Hz and 50 Hz related frame rates. The drop down menu for Output Video
Standard appears as follows:
Note: "Follow input-FS only" can be used when the input and output standards are the same. It results in
lower delay.
Horizontal Phase Offset: With this control, the user can set the horizontal timing of the output video with
respect to the reference input set by the Reference Select control. There are separate settings of H phase
Revision 1.2
Page - 20
Advertisement
Table of Contents
