Table of Contents
Advertisement
7814UDX-4K Series
HD/3G/UHD Up/Down/Cross Converters
5.8.
AUDIO
The Audio control menu is used to configure the on-board audio sample rate converters and the internal
audio delay block. The Audio menu is also used to enable and disable the four internal audio embedders
and specify C bit processing modes. SRC status, Audio Delay, Video Delay are also monitored and
reported in the Audio menu.
Audio Controls [+APROC]
Audio Delay: This control adjusts the audio delay +/- 350.00 ms. This delay is relative to the delay that
the module automatically inserts to match audio path and video path delays. The audio delay can be
adjusted with single sample precision.
NOTE: Negative values are limited to the amount of video delay; the card does not have
negative delay ability. Video delay can be added in the Video Tab in order to achieve a
greater negative audio delay.
SRC Mode: This control allows the user to adjust the mode for the sample rate converters.
Page - 34
Figure 5-12 : WebEASY
Revision 1.2
- Audio Panel
®
Advertisement
Table of Contents
