Affixing A Label To A Power Cord - H3C S12500 Installation Manual

Figure 105 Affixing a label
Stick side
Figure 106
Figure 106 Affixed labels
TO:
B02

Affixing a label to a power cord

Stick the label to the recessed rectangular area on the identification plate. You can stick the label to
either side of the identification plate. Be sure to affix the labels on the same side of the identification
plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other
positions as needed.
1
shows the affixed labels when the cable is laid vertically and horizontally.
03 12
Figure 105
2
4
shows how to affix a label when a cable is laid horizontally.
135
3
TO:
B02 03 12
5