Labels For Devices; Filling In Labels; Affixing A Label To A Signal Cable - H3C S12500 Installation Manual

Figure 104 Generic label
(1) Dividing line on the label

Labels for devices

A device label is used to identify the device name, model, address, installation date, and so on.

Filling in labels

You can print or write desired contents on labels. H3C recommends that you print labels.
To print labels, select a label printer and a proper label template as needed. For more information
about using a label printer, see the user guide of the printer.
To write labels, use black markers. A marker has two nibs. Be sure to use the smaller nib to write
labels.
Affixing labels
After printing or writing a label, remove the label from the bottom page and affix it to the signal cable,
or the identification plate of the power cord.

Affixing a label to a signal cable

Typically, a label is affixed 2 cm (0.79 in) away from the connector on a signal cable. You can affix the
label to other positions as needed.
vertically.
(2) Cut dotted line
Figure 105 shows how to affix a label when a cable is laid
134