Appendix C Transceiver Modules - H3C S12500 Installation Manual

Appendix C Transceiver modules

CAUTION:
To avoid damages to the transceiver, a compatible optical attenuation must be used if a short-haul
optical fiber is connected to a long-haul transceiver (40 km/24.86 miles or above). A loopback
occurs if you connect the receive optical bore to the transmit optical bore with a short-haul optical
fiber, as shown in
Figure 100 Loopback operation on a transceiver module
The S12500 Routing Switch Series supports the following transceiver modules and cables:
•
100-GE CFP transceiver modules
•
40-GE QSFP+ transceiver modules
•
40-GE QSFP+ cables
•
10-GE XFP transceiver modules
•
10-GE SFP+ transceiver modules
•
10-GE SFP+ cables
•
FE/GE SFP transceiver modules
100-GE CFP transceiver modules
Table 52 100-GE CFP transceiver module specifications
Model
CFP-100G-LR4
-WDM1300
CFP-100G-LR4
-WDM1300-A
Figure 100.
Central
Connector
wavelength
1295.56 nm LC
1300.05 nm LC
1304.58 nm LC
1309.14 nm LC
1295.56 nm LC
1300.05 nm LC
1304.58 nm LC
1309.14 nm LC
Fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
9/125 µm single-mode fiber
122
Max transmission
distance
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)
10 km (6.21 miles)