H3C S12500 Installation Manual page 21

Item
M6*12 screw
M6 cage nut
ESD wrist strap
Cable tie
NOTE:
The number of screws, nuts, and cable ties supplied with the switch depends on those shipped from
the factory.
User-supplied tools and equipment
•
Mechanical lift
•
Phillips screwdriver P1 – 100 mm, P2 – 150 mm, and P3 – 250 mm
•
Flat screwdriver P4 – 75 mm
•
Marker
•
Tape
•
Diagonal pliers, wire-stripping pliers, and wire clippers
•
Socket wrench
•
Cables such as network cables and fiber cables
•
Meters and equipment, such as hub and multimeter
•
Configuration terminal, such as PC
NOTE:
The rack accessories and installation tools are not included in this section. They might vary
depending on the rack model. For more information, see the installation guide of the corresponding
rack.
Quantity Purpose
1 set
Secures the switch to the rack.
1 set
2 ESD prevention.
Organizes and secures AC power cords.
Several
Supplied with the S12508 and S12518 switches.
13