Connecting A Dc Power Cord - H3C S12500 Installation Manual

Figure 34 Installing the power cabling rack
Insert the connector of an AC power cord into the power receptacle.
2.
Secure the AC power cord to the cabling rack with cable ties.
3.
Repeat steps 2 and 3 to organize and secure other AC power cords.
4.
Connect the other end of the AC power cords to the power source.
5.
Figure 35 Connecting AC power cords

Connecting a DC power cord

CAUTION:
A plastic protection cover is installed in front of the terminal block to protect operators from being
shocked. Remove the protection cover before connecting power cords and then install the
protection cover promptly.
35