Installing The Mounting Brackets - H3C S12500 Installation Manual

To install cage nuts to the rack:
Align the mounting bracket with the left rack post, making sure its bottom edge and the slide rail
1.
are level. Mark the positions of the cage nuts on the rack post according to the mounting holes
on the mounting bracket. (Each mounting hole on the mounting bracket corresponds to one
cage nut.)
NOTE:
The mounting brackets are fixed on the chassis of the S12508 and S12518 before delivery from
the factory. To determine the installation holes for cage nuts, you can remove a mounting
bracket from the chassis and mark the nut holes, or use a pattern tool to record the installation
holes of the mounting brackets and mark the nut holes accordingly.
Install cage nuts to the rack posts using the method described in relevant steps in
2.
slide rails."
Figure 16 Installing the cage nuts

Installing the mounting brackets

Attach the mounting brackets onto the left and right sides of the switch.
1
2 3
20
"Installing