Ornament Panel - Maytag Commercial MYR20 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove the ornament panel, remove the
front panel (See page 4-32).
2. Remove the door and hinges
(See page 4-28).
3. Remove six T-30 screws securing the
ornament panel to the front of the washer.
Six T-30
Screws

OrnaMenT paneL

4. Support the panel when removing the last
5. Remove the ornament panel.
4-35
screw.