Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove the Emergency stop button,
open the control panel (See page 4-18).
2. Disconnect the wire harness plug.
Harness
Plug
3. Remove four 7mm hex nuts securing the
emergency stop button mounting plate to
the control panel.
eMerGenCY STOp BuTTOn
4-19
4. There is a nut, a star washer and a flat
washer.
5. Support button when removing the last nut.
6. Remove the emergency stop button from
the front of the control panel.