Wifi Module - Maytag Commercial MYR20 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. To remove the Wifi module open the control
panel (See page 4-18).
2. Push the locking tab and disconnect the
Wifi wire harness from the HMI
(See page 4-21).
3. Spread the four tabs on the mounting
bracket securing the Wifi module to the
control panel.
Four Tabs

WiFi MODuLe

4. Lift the Wifi module out of the control panel.
nOTe: On the back of the Wifi module is a
sticker with the SAID, Smart Appliance ID,
and the MAC address for this Wifi module.
4-25